Yamaha

Trick Lightweight drilled WORKS style aluminum washers available in 25mm OD and and 18mm OD for use with M6 bolts.

• M25 is 25mm (about 1") OD and is the size shown in the pictures.
• M18 is 18mm OD (about 5/8") and is commonly used on 2 strokes for pipe mounts etc.

Most popular application is on the upper and lower radiator mounts and on the gas tank mounting bolt as shown in the above images.

SOLD individually so please order accordingly!

Billet Aluminum Banjo Bolts with Safety Wire holes (a new set of copper seals included with each kit)

M10 X 1.25 fits all Japanese MX bikes. (does not fit KTM/HUSKY) 20mm long from the base of the bolt flange to the tip of the threads Sold by the pair (1 pair is 2 bolts), so please be sure to select the quantity you want in the shopping cart before checking out! Our new design fits all JAPANESE MX bikes 2004-2020 and features a small 12mm head so there are no clearance issues at the rear master cylinder! And they are also now drilled for safety wire. At only $14 each, these are half the price of similar high-end banjo bolts on the market!

Torque to 12-14 lbs/ft!

Trick looking and lightweight 7071 billet aluminum flange nuts in 4 colors.

Popular for use as brake clevis lock nut, chain guide, and chain roller mounts or any location where you want a trick custom detail!

M6 X 1.0

Available in BLUE, RED and PURPLE

The MOTO STUFF WORKS EDITION Billet 1-Piece Caliper V2 

20% lighter than the stock cast aluminum NISSIN calipers found on HONDA, KAWASAKI, SUZUKI, and YAMAHA MX bikes. Our new billet construction design is an exact replica of the WORKS NISSIN part found on top factory team bikes like Ken Roczens HONDA CRF 450R and Eli Tomacs KX450F, All GEICO bikes, etc. The only difference is that our design is compatible with stock caliper brackets and fork lug spacing!

Kit Includes:

• 1- Piece 7025 Billet Alloy Housing Body
• 2- Lightweight 7076 Alloy Pistons (27mm leading edge and 30mm trailing edge)
• 1- Trick Lightweight Stainless Steel Lower Slider Pin with safety wire feature
• 1-Hardened Slide Post
• 1- Stainless Bleeder Screw
• 1- Billet Aluminum Banjo Bolt drilled for safety wire (Anodized Blue or Red)
• 1-Billet Aluminum Bleeder cap (Anodized Blue or Red)
• 1- Stainless Steel Pad isolator clip and Anti-rattle Clips
• 1- Set of AP Racing Pads, best available!

OPTIONAL UPGRADE: If you are severely abusive and fast enough to fade your brakes or you just love really trick stuff, we can build your caliper with our ultra trick Titanium Nitride coated Titanium castellated pistons. The thermal conductivity of Titanium is 10 times lower than Aluminum! The castellated crown (semi-circle cutouts milled into the piston crown) provides airflow to the backside of the piston further improving fade resistance. You can add select the Ti Piston option above.

Key Features and Benefits:

1. The worlds only aftermarket differential bore caliper (2 different piston sizes) for modern MX bikes. The differential bore design uses a 27mm piston on the leading edge and a larger 30mm piston on the trailing edge. This design eliminates the uneven pinching effect (uneven force distribution) that naturally occurs whenever you apply a clamping force to a rotating component. The balanced force dispersion provides lower operating temps, reduced brake fade, reduced wear and most importantly more controllable and consistent modulation and power. As the surface of the rotor heats up, the clamping force of the pistons has to be increased to avoid brake fade. 
2. Billet one-piece body with massive bridge structures reduces flex by 28%, which improves consistency and response at the lever. Providing more controllable stopping power with less effort and helps reduce arm pump and rider fatigue.
3. We've also incorporated a new piston seal design that provides a pull back feature which pulls the pistons .020" - .030" away from the pads slightly after each brake application eliminating rotor drag. 

Fits all current MX bikes except KTM/HUSKY

PLEASE NOTE the two following important details:

1. 2019 and 2020 HONDA CRF models will require a 2015-2018 caliper bracket. Either OEM or one of our oversized brake kits for 2015-2018. This is because the 2019 and 2020 models have a different bolt hole pattern on the caliper pin spacing.
2. 2007-2020 Yamaha models will require that you upgrade the Master Cylinder. Available here- 11mm Master cylinder Upgrade

The MOTO STUFF Billet 1-Piece Caliper is available for most modern (2004-2020) HONDA, KAWASAKI, SUZUKI and YAMAHA MX bikes (including 2 strokes) and it is a great compliment to the MOTO STUFF Blade Braking System! The MOTO STUFF "WORKS EDITION" caliper is ready to bolt on and equipped with premium components including stainless steel sliding pin, Billet Banjo bolt, billet Bleeder cap and AP Racing pads. A true works level caliper at an affordable price!

DOES not fit KTM or HUSKY!
1-Year Warranty Materials and Workmanship
Available for the following Models Application:

• 2004-2020 CR125/CR250/CRF250/CRF450 & 2006-2016 CRF250X/450X (fits 2019 & 2020models with our 280mm caliper bracket & rotor please call for details) 
• 2006-2020 KX250F/450F & 2007-2011 KLX450R
• 2004-2008 RM 125/250
• 2004-2020 RMZ 250/450
• 2002-2007 YZ125/25, 2002-2007 YZ450F, 2002-2006 YZ250F, 2004-2020 WR250F/450F* (requires Honda master cylinder upgrade)

PLEASE NOTE: 2007-2020 Yamaha models will require that you upgrade the Master Cylinder. Available here- 11mm Master cylinder Upgrade
2007-2020 RM250Z/450Z

PLEASE NOTE the two following important details:

1. 2019 and 2020 HONDA CRF models will require a 2015-2018 caliper bracket. Either OEM or one of our oversized brake kits for 2015-2018. This is because the 2019 and 2020 models have a different bolt hole pattern on the caliper pin spacing.
2. 2007-2020 Yamaha models will require that you upgrade the Master Cylinder. Available here- 11mm Master cylinder Upgrade

" 8-1/2" X 11" sheet includes 20 premium graphics grade material decals (pressure washer proof). Use them on your fork guards, disc guards, fender arches, air box, shrouds, helmet, swing-arm etc.

The Splitstream radiator cap increases the boiling point of the coolant in your bike's radiator by increasing the cooling system operating pressure.

The stock radiator cap releases coolant at 1.1 BAR (15 psi) of coolant system pressure.

The Splitstream radiator cap is available in

• 1.6 BAR ( 23 psi)
• 1.8 BAR (26 psi)
• 2.0 BAR (30psi)

Use the 1.6 BAR / 23 psi cap to raise the boiling point on most models, especially helpful if you are running aggressively advanced ignition programs, a high compression piston or aggressive cam.

The 1.8 & 2.0 Bar caps are for bikes running HD radiators as the stock radiators are not quite strong enough to operate at sustain high-pressure levels.

Motostuff 5" Jersey Logo Heat Transfers. (sold as pair)

Motostuff iron-on logos made from quality MX grade material to resist peeling and fading. Conveniently sized to place anywhere on your jersey.

Application is quick and easy!

Iron-On Application Instructions:

• Medium Temp 265 F / 130 C.
• Simply apply medium pressure for 20 seconds and peel warm.

New Motostuff decals - Sold individually

4.5" available in:

• red/white
• white/black
• fluorescent /black
• black/fluorescent

Standard decal material - Great for the toolbox, helmet, truck or locations that don't take direct MOTO blast

Red anodized lightweight Banjo Bolts with holes drilled for safety wire and copper washers.

Fits all Japanse MX bikes but the following:

• Cannot be used in the front master cylinder on HONDA's.  (22mm length is too long) 
• Does not fit KTM or Husky

Sold as a pair.

Pair of Moto Stuff rectangular decals 5 inches long and an inch tall (130mm X 25mm)

MOTO STUFF rectangular stickers are made by the crew over at Throttle Jockey.

Our rectangular version is approximately 5 inches long and an inch tall (130mm X 25mm)

These are popular for use on fork guards, brake disc covers, fenders, side plates, helmets, toolboxes, etc.

Only $4.95 / Pair!

Get a MOTO STUFF VINTAGE T and get with the program!

Super plush combed cotton is comfy, wrinkle free, pre shrunk and breathes well.

New Motostuff decal.

Sold individually.

Printed on Premium Grade MX material.

Great for use on a disc guard, fork guards or swing arm.

Pair of MOTO STUFF Icon Decals 3 inches long and 2 inches tall (80mm X 50mm)
MOTO STUFF ICON stickers are made by the crew over at Throttle Jockey. Our rectangular version is approximately 3 inches long and 2 inches tall (80mm X 50mm)
These are popular for use on fork guards, brake disc covers, fenders, side plates, helmets, tool boxes etc.

Only $4.95 / Pair!

New Motostuff Fender Arch decals

• 250mm / 10" long
• Available in White, Black & Gray
• Sold in Pairs
• Premium graphics grade material decals (pressure washer proof)

With the Gripper Mount, there’s no need to buy a different camera clamp for each helmet or vehicle or use bulky mounting hardware and sticky mounts that leave residue on your equipment. The Gripper Mount is compatible with all GoPro models and serves many purposes throughout your adventures. Use it as a quick-attach fixed camera mount, a handheld stabilizer, or a mini tripod. You can easily unmount and move the Gripper Mount as many times as it takes to find the best perspective. Then simply use the quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!

Dango Designs Gripper Mount Features:

• Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
• Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
• Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
• Flexible front web conforms to your object.
• Robust dual torsion spring provides strong clamping force.
•  2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
• Compatible with ¼ in 20 mounted digital action cameras (adapter version only see tab) (see adapter kit in 2nd tab) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session, and Hero 6 Black.
• Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included.

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is.  You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

 

 

Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation) 

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms.  Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

• Compatible with Dango Design Gripper Mount and other action camera mounts
  • All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
• Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
• The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included

Hardware Included in add on accessory adapter kit*

• 20 mm Universal Extension Arm with Screw
• 35 mm Universal Extension Arm with Screw
• 1/4”-20 Universal Camera Adapter
• * Gripper Mount and GoPro camera not included

 

 

• M6 X 1.0  bolts have 8mm heads (standard, not fine thread)
• M8 X 1.25 bolts have 10mm head (standard, not fine thread)

Torque to the OEM fastener spec for the bolt being replaced.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Get a MOTO STUFF ICON T and get with the program!

Super plush combed cotton is comfy, wrinkle-free, pre-shrunk and breathes well.

 

 

 

Get a MOTO STUFF BEAST T and get with the program!

Super plush combed cotton is comfy, wrinkle-free, pre-shrunk and breathes well.

 

 

 

M6 X 1.0 Titanium Flange Nut

MOTO STUFF ICON Logo Hat Black Snap Back

It's a hat with adjustable snap back closure

One Size Fits All

 

• M6 X 1.0  bolts have 8mm heads (standard, not fine thread)
• M8 X 1.25 bolts have 10mm head (standard, not fine thread)

Torque to the OEM fastener spec for the bolt being replaced.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Still the best cure for helmet-hair!

MOTO STUFF embroidered logo

Style: Velcroback One Size Fits All

Colors:

• NAVY / FLO
• RED / BLK
• ORG / BLK

MOTO STUFF ICON Logo Hat Black FLEX FIT

High-quality 3d Embroidered Moto Stuff "M" ICON logo on front and Moto Stuff logo on the back