Lightweight Billet Aluminum Banjo Bolts for NISSIN Calipers (pair)
MS-BB-BRegular price $36.00 Save $-36.00
Pair of Billet Aluminum Banjo Bolts with Safety Wire holes (a new set of copper seals included with each kit)
M10 X 1.25 fits all Japanese MX bikes. (does not fit KTM/HUSKY) 20mm long from the base of the bolt flange to the tip of the threads Sold by the pair (1 pair is 2 bolts), so please be sure to select the quantity you want in the shopping cart before checking out! Our new design fits all JAPANESE MX bikes 2004-2020 and features a small 12mm head so there are no clearance issues at the rear master cylinder! And they are also now drilled for safety wire. At only $18 each, these are half the price of similar high-end banjo bolts on the market!
Torque to 12-14 lbs/ft!
Front Oversize BLADE Brake Kit SUZUKI RMZ 280mm
MS-280-BBK-SRegular price $318.00 Save $-318.00
MOTO STUFF 280mm Blade Braking System for SUZUKI RMZ
Why upgrade your brakes? You can easily lock them up and slide/skid now, right? That's the problem. Modern motocross bikes have very powerful brakes, however, they don't offer much in the way of modulation or linear application. That is the ability to achieve maximum braking force without wheel lock-up. As soon as the wheel locks up, you lose control or much worse! Power without control is why 4 strokes hook up and outperform 2 strokes. Your ability to modulate (control) the braking force is what makes for a great brake that you can put to maximum use. MOTO STUFF Bladetm brakes are the highest quality and absolute best performing brakes you can buy.
Team HONDA and the GEICO Factory Connection team have been winning titles with MOTO STUFF Bladetm Brakes for several years. They can run any brakes they want and they choose the MOTO STUFF Blade System as it provides ultimate performance and significantly improved durability, heat rejection and lasts 2-3 times longer than the competition. Wide modulation range, linear and consistent performance rapidly builds your trust in your brakes at the limit. Below are the main benefits you’ll enjoy with a MOTO STUFF BLADE SYSTEM that will improve your competitive edge!
MOTO STUFF Pro-Lite Rear Blade Rotor SUZUKI
MS-RR-240-SRegular price $188.00 Save $-188.00
MOTO STUFF Pro-Lite Lightweight Rear Blade Rotors
25% lighter than the stock rear rotor and made of the same heat-treated stainless alloy and hardening process as the MOTO STUFF front Blade rotor for unmatched fade-resistant performance. Original design developed for the GEICO HONDA - FACTORY CONNECTION RACING TEAM! This extremely high-performance rotor reduces critical unsprung weight and lasts up to 50% longer than the stock rotor.
MOTO STUFF 280mm Blade Replacement Rotor SUZUKI
MS-OSR-280-SRegular price $208.00 Save $-208.00
MOTO STUFF 280mm BLADE replacement rotor SUZUKI
In the title hunt? Keep a spare handy, cause you never know when some Yamaha rider might broadside you and mess up your rotor! MOTO STUFF BLADETM rotors are made using exclusive proprietary processes and materials to provide superior performance and longevity. Our rotors typically last 3-4 times longer than the competition. Think about that when you are comparing prices!
MOTO STUFF BLADETM rotors are made using exclusive proprietary processes and materials to provide superior performance and longevity. Our rotors typically last 3-4 times longer than the competition. Think about that when you are comparing prices!
MOTO STUFF Caliper Brackets SUZUKI
MS-CB-280-K-SRegular price $128.00 Save $-128.00
Fits SUZUKI RMZ 250 2007-2022 and RMZ 450 2006-2022
MOTO STUFF Caliper Brackets are precision machined from T6061 aluminum billet. After machining they are media tumbled for a smooth finish and then hard anodized for superior strength and performance. Our brackets are up to 50% lighter and 70% stronger than other brackets on the market. This is achieved through FEA model analysis and detailed machining processes.
Please Note! A bracket is included with all MOTO STUFF Brake kits, so these are for use as replacements if you somehow damage one or have a compatible 280mm rotor from another manufacturer.
If you have any questions about compatibility or fitment, please give us a call or send us an e-mail to info@MOTOSTUFF.COM
Pro Lite Steel Braided Brake Line for SUZUKI RMZ
MS-FCR-H-002Regular price $144.00 Save $-144.00
MOTO STUFF Pro-Lite lines for Suzuki
Fits: 2007-20204 RMZ 450 & 2005-2024 RMZ 250
Made of the lightest aerospace grade Smooth Bore PTFE Hose providing the lowest possible volumetric expansion at maximum operating pressure.
But most importantly, the low expansion and greatly reduced fluid volume provides ultimate positive brake feel with less lever travel.
Here's some information that might help you determine if our Pro-Line is a good option for you
Here's a rough explanation of what to expect with the different lines:
Keep in mind, a super responsive lever takes some getting used to, you wouldn't want to install one the night before a race! Try and get several practices in on it so you can become accustomed to the power & response before race mode!
MOTO STUFF Pro-Lite lines can handle pressures up to 3000 psi at maximum brake fluid temps while remaining robust and flexible. With only a 2mm bore diameter, MOTO STUFF Pro-Lite lines offer a reduction of hose surface area of up to 60% compared to common -03 aftermarket braided brake lines and almost an 80% reduction when compared to stock brake lines!
The small bore in our Pro lines is important as it greatly reduces the amount of surface area of hose material (up to 80%!) and eliminates the spongy/soft feel at the brake lever or pedal that larger bore material exhibits due to expanding under high pressure and high temps.
MOTO STUFF Pro-Lite lines are constructed of smooth-bore high-pressure hose designed for high pressure and high impulse severe duty applications. It maintains excellent flexibility due to the superior tension controlled single layer small wire diameter plaited braid design.
All MOTO STUFF Pro-Lite lines are factory made with permanently attached (crimped) fittings and pressure tested for ultimate reliability and safety.
This brake line material was developed for and is used extensively in Formula 1 for braking, suspension and gearbox hydraulics and in WRC Rally and touring cars for braking and power steering applications and by top AMA SX and MX teams for braking.
End fittings are stainless steel crimped and fully adjustable on the bike! (see video below for details)
Lastly, MOTO STUFF Pro-Lite Lines are up to 50% lighter than the stock lines! Replace both of your brake lines and you can drop close to half a pound with this upgrade.
BOLT Suzuki Rotor Bolts: RM125/250
SRTR125250Regular price $9.95 Save $-9.95
Our Suzuki Rotor Bolt kit fastens both front and rear wheel. These rotor bolts feature medium strength thread lock patches.
'00-'12 RM65 RM 80/85 2001-2020 , RM125/250 2001-2008
'04-'20 RMZ250, '05-'20 RMZ450
Our hardware meets or exceeds OEM specs. Proudly designed and assembled in the USA with components from Taiwan.
Steel Braided Brake Lines for SUZUKI
CF0017BB-SETRegular price $138.00 Save $-138.00
2008-2023 RMZ 250/450
MOTO STUFF premium Steel Braided Brake lines by CORE MOTO are made to our own specifications using only the highest quality materials including Dupont PTFE liners and a tight weave aircraft-grade stainless steel casing covered in Stealth Black vinyl and an industry exclusive clear translucent HD ACRYLON sheathing to prevent abrasion and provide precise alignment on the bike.
The polished stainless steel banjo fittings are adjustable for precise fitment! Each line also comes with Stainless steel Banjo Bolts and a new set of copper sealing washers.
FULL 2 YEAR WARRANTY!
Upgrading to a stainless line will improve brake lever feel by reducing line expansion, especially on bikes with stock rubber lines that are more than 6 months old (around 20-30 hours of use) year old which will begin to flex and balloon when the brakes are applied. Also, the smaller inside diameter of our lines reduces the volume of fluid being compressed so the response is quicker.
Our lines are made using 2.5mm tubing vs the 3mm tubing most common aftermarket braided lines are made of. Our lines also feature a longer protective sheathing that makes them compatible with the Cycra Stadium plates. With most other lines the sheathing will catch the Cycra cable guide and bind. Our lines also utilize compression bonded sheathing to ensure that the sheathing does not slide on the line which can lead to dangerous rotor contact.
The patented adjustable banjo fittings eliminate binding issues and excessive rubbing /abrasion. (Easily adjusted using pliers to grip and rotate the line at the crimp joint area)