Titanium

• M6 X 1.0  bolts have 8mm heads (standard, not fine thread)
• M8 X 1.25 bolts have 10mm head (standard, not fine thread)

Torque to the OEM fastener spec for the bolt being replaced.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Pro Pegs Titanium Rear Brake Lever Tip

Get a Grip!

Upgrade your slippery stamped steel stock tip with this super-grippy full titanium tip and eliminate the risk of brake lost at the most inopportune times!

• 2016-2023 KTM 125,150, 250 SX
• 2016-2023 KTM 250/350/450 SX-F/XCF
• 2016-2023 Husqvarna TC 125, TC250, FC 250/350/450

• M6 X 1.0  bolts have 8mm heads (standard, not fine thread)
• M8 X 1.25 bolts have 10mm head (standard, not fine thread)

Torque to the OEM fastener spec for the bolt being replaced.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

The Choice of Champions including Brett Metcalfe, Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• HUSQVARNA 2016 -2023 All
• HUSQVARNA 2014-2015 All

Titanium Motor Mount Bolt Set - KTM, GASGAS & HUSQVARNA

Kit includes:

• 1-Titanium upper front Motor Mount Bolt
• 1-Titanium lower Motor Mount Bolt

Choose between the following two options:

• KTM 125/250 2016-2024
  
• KTM 250/350 2013-2024 
• GASGAS MC250F 2021-2024
• HUSQVARNA TC 125/250 2014-2024  
  
• HUSQVARNA FC 250/350 2014-2024
  

Option #2 TIEB45KTM Fits: (Pair Replaces OEM part # 59003013000)

• KTM 450 2007-2024
• GASGAS MC450F 2024
• HUSQVARNA FC 450 2014-2024
• HUSQVARNA TC 125-250 2024 

Titanium Rear Brake pedal bolt and nut 

Available for:

All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes. 2016-2022 (replaces OEM Part # 0032100406S & 0032100356S)

 All HUSQVARNA TC 125/250 / FC 250/450 2014-2022

And 2023 FC250/450

Titanium Screw Plastic 

Body fastener kit

6 bolts to fit the fork guard brake line clamp bracket, rear mud flap and upper front shroud to tank locations. 

For All KTM 125, 250, 300 2 stroke and all 250, 350, 450, and 525 four strokes. 2016-2020

Fits HUSQVARNA TC 125, 250 & FC 250/450 2014-2020

Set of 6 Ti Fork Guard Bolts for All  KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (set of 6 replaces OEM part 59001092050)

Fits HUSQVARNA TC 125/250 / FC 250/450 2014-2020

Titanium Radiator Flange bolt Set for All 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (set of 4 replaces OEM 0024060123)

Fits HUSQVARNA TC 125/250 / FC 250/450 2016-2020 

Titanium Front End Fastener Kit

 Front End Kits include: 8-Triple Clamp bolts, 4-handlebar clamp bolts, 4-fork lug pinch bolts and 2-brake caliper mounting bolts.

(Please note if you have a Factory Edition or Rockstar Edition or aftermarket clamps, please measure a bolt and let us know so we can exchange them for the correct size)

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

CLOSEOUT SPECIALS

SAVE up to 50% on SELECT Kits!

Titanium Engine Fastener / Bolt Kits And Front End Kits

Engine Kits include: Right and left engine case bolts, ignition cover bolts, clutch cover bolts, water pump cover, starter, chain guard, etc. Each component set of bolts is packaged in a ziplock with qty, length and location information.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

Long Titanium Seat Bolt for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes.

2016-2022 Replaces OEM part #79107040010

Titanium Front Axle and Steering Stem Cap set fits all All 2008-2020 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (Set of 2 Replaces OEM 70009082000)

Fits HUSQVARNA TC 125/250 / FC 250/450 2014-2020

Oil fill plug for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes ( QTY 1 replaces OEM Part 794300020033)

Fits

• HUSQVARNA TC 125/250 / FC 250/450 2015-2020
• KTM SX/SXF/EXC 125-450 All years

Does not fit Factory or Rockstar Editions or HINSON Clutch Covers

Titanium Valve Cover Bolt Set - KTM & HUSQVARNA

Choose your bike year/model below:

Option #1: 

• KTM SXF 250/350 (Set of 3 bolts replaces OEM 77336054150)
  
• HUSQVARNA FC 250/350 2014-2022
  

Option #2: 

• KTM 450 2013-2018 (set of 4 replaces OEM part#78036054100)
• HUSQVARNA FC 450 2014-2018 

Option #3: 

• KTM 450 2019-2022 (set of 3 bolts replaces OEM part # 79136054000)
• HUSQVARNA FC 450 2019-2022

Option #4: 

• 2023 KTM Factory Edition 450 

Pair of chain adjuster bolts/nuts for

Fits:

• All KTM 125/250/300 2-Strokes
• All KTM 250/350/450/525 4-strokes (Set of 2 replaces OEM Part 50304040100)
• All HUSQVARNA TC 125/250
• HUSQVARNA FC 250/450 2014-2020

The open pattern of the Enduro/Mud Version virtually eliminates clogging/packing of the peg if you are a peg dragger or ride in extremely muddy conditions frequently where this a common problem. Plus they look cooler and are lighter than the full traditional versions!   

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

The Choice of Champions including Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• HUSQVARNA 2016 -2023 All
• HUSQVARNA 2014-2015 All

Pro Pegs Titanium peg pivot pins

Aerospace Grade Titanium
– CNC Machined
– Heat Treated

Includes:
(2) Titanium Foot Peg Pins
(2) Titanium Washers

(2) Steel Cotter Pins 

Fits:

• 2016-2023 KTM 125,150, 250 SX
• 2016-2023 KTM 250/350/450 SX-F/XCF
• 2016-2023 Husqvarna TC 125, TC250, FC 250/350/450

M6 X 1.0 Titanium Flange Nut

M10 X 1.5 Titanium Flange Nut

M10 X 1.25 Titanium Flange Nut

The open pattern of the Enduro/Mud Version virtually eliminates clogging/packing of the peg if you are a peg dragger or ride in extremely muddy conditions frequently where this a common problem. Plus they look cooler and are lighter than the full traditional versions!   

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

The Choice of Champions including Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• HUSQVARNA 2014-2015 All