Titanium

• M6 X 1.0  bolts have 8mm heads (standard, not fine thread)
• M8 X 1.25 bolts have 10mm head (standard, not fine thread)

Torque to the OEM fastener spec for the bolt being replaced.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Pro Pegs Titanium Footpegs HONDA

The Choice of Champions including Brett Metcalfe, Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• HONDA CR 125-250 2002-2007
• HONDA CRF 250-450 2003-2022

• M6 X 1.0  bolts have 8mm heads (standard, not fine thread)
• M8 X 1.25 bolts have 10mm head (standard, not fine thread)

Torque to the OEM fastener spec for the bolt being replaced.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Ultra trick Front brake pins for your racer or build!

Pro Pegs Titanium Footpegs HONDA MUD/ENDURO

The open pattern of the Enduro/Mud Version virtually eliminates clogging/packing of the peg if you are a peg dragger or ride in extremely muddy conditions frequently where this a common problem. Plus they look cooler and are lighter than the full traditional versions!   

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

The Choice of Champions including Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip! (Mud versions weigh even less!)

Fits:

HONDA

• CR125-250 '02-'07
• HONDA CRF 250R & 450R 2002-2020

Super Trick and lightweight, drilled for safety wire and 10mm heads for tight clearance access.  Sold as a pair.  Sealing washers included.  

HONDA-KAWI-SUZI-YAMAHA M10 X 1.25

KTM-HUSKY-GASGAS M10X1.0 

M6 X 1.0 Titanium Flange Nut

Front End Kits include 18 bolts: 

• 8-Triple Clamp bolts (Please note if you have aftermarket clamps, please measure a bolt and let us know so we can exchange them for the correct size)
• 4-handlebar clamp bolts
• 4-fork lug pinch bolts
• 2-brake caliper mounting bolts

Fits 2017-2020 450R and 2018-2020 250R 

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

M8 X 1.25 Titanium Flange Nut

Titanium Brake Pedal Bolt Honda

Fits Honda CRF250/450's 2005+

REPLACES OEM 46513-KRN-730

Engine Kits include: Right and left engine case bolts, ignition cover bolts, clutch cover bolts, water pump cover, starter, chain guard, etc. Each component set of bolts is packaged in a ziplock with qty, length and location information.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

Titanium Rear master cylinder mount bolts Honda CRF250/450 2005+

REPLACES OEM 90114-MAC-780

Titanium Body work kit fits Honda 450's 2021+

8 bolt kit replaces radiator shrouds, Side plate and seat bolts. 

REPLACES OEM 90126-MKE-AF 0

OEM 90126-MEN-A70 / 90101-KRN-730

Titanium Sub Frame Bolt Kit Honda CRF450

Fits Honda CRF450's 2012+

REPLACES OEM 90122-MKE-AF 0

Titanium Engine Hanger Support Bolts CRF450 2021+

REPLACES OEM 90123-MEN-730 / 90102-MEN-A30

Titanium Fork Guard Bolt Kit Honda CRF

Fits Honda CRF 250's and 450s 1999+

REPLACES OEM 90113-MAC-780

Titanium Chain Tension Bolt Kit Honda

Fits Honda CRF250/450's 2004+

REPLACES OEM 90105-MEN-000/90309-357-000

Titanium Front Brake Line Bolts Honda CRF250/450 2004-2022

 Includes Brake line clamp (2) and number plate guide loop (1) 

REPLACES OEM 90104-KRN-90 / 90113-KZ3-000

Titanium skid plate / Engine Guard Kit Fits Honda 450's 2021+

Qty 2

REPLACES OEM 90126- MKE-A00