




48 products
M6 Titanium Flange Bolts
TIM610
Regular price $4.00 Save $-4.00
Torque to the OEM fastener spec for the bolt being replaced.
Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.
Pro Pegs Titanium Rear Brake Lever Tip
PPTBT/KH001
Regular price $69.95 Save $-69.95Pro Pegs Titanium Rear Brake Lever Tip
Get a Grip!
Upgrade your slippery stamped steel stock tip with this super-grippy full titanium tip and eliminate the risk of brake lost at the most inopportune times!
Pro Pegs Titanium Footpegs HUSQVARNA
PPMX026h
Regular price $268.00 Save $-268.00The Choice of Champions including Brett Metcalfe, Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more!
Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!
Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!
Fits:
M8 Titanium Flange Bolts
TIM820
Regular price $6.25 Save $-6.25
Torque to the OEM fastener spec for the bolt being replaced.
Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.
Splitstream Fuel Filter HUSQVARNA/KTM
SFFSKTM
Regular price $29.95 Save $-29.95Splitstream Fuel Filter HUSQVARNA & KTM
Each Splitstream fuel filter is made of fuel safe nylon mesh for long life and protection. Designed for a snug fit under the fuel cap, where it strains all fuel that enters the fuel tank. When you are riding it is under your fuel cap ready for the next fill up.
A couple of things we noticed while testing the Splitstream fuel filters over the past few months.
Here are some helpful links regarding the fuel system on modern injected bikes:
With the introduction of fuel injection on several 2009 MX bikes, clean fuel has become critical. Many owners are experiencing loss of power and starting issues related to contaminated fuel. The contaminants gradually accumulate in the in-tank filter and over time reduce flow to the point that it begins to affect performance.
Initially, the complete fuel pump assembly had to be replaced at over $300 on some models. The quality control on pump gas is really poor nowadays and you will not believe what you'll find in the filter! Over a short period of time, unfiltered fuel allows debris that will eventually begin to cause starting problems and bogging due to clogging. In severe cases, the bike will not start/run at all and can cause the bike to bog or stall at the most inopportune of times.......
The fine micron mesh material used in the Splitstream fuel filter will even filter out water, however, you will need to pull the filter and shake it out after fueling, otherwise, the vibration of the running bike will allow the water to pass through the filter.
Available for the following HUSQVARNA & KTM models:
Titanium Front Sprocket Bolt
TIFSBKTM
Regular price $18.00 Save $-18.00Titanium Front sprocket Bolts for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes. 2016-2020 (Replaces OEM part #59033034044)
Fits
Titanium Motor Mount Bolt Set
TIEB25KTM
Regular price $48.00 Save $-48.00Titanium Motor Mount Bolt Set - KTM, GASGAS & HUSQVARNA
Kit includes:
Choose between the following two options:
Option #2 TIEB23KTM Fits: (Pair Replaces OEM part # 59003013000)
Titanium Rear Brake pedal bolt and nut KTM / HUSKY
TIBPBKTM
Regular price $18.00 Save $-18.00Titanium Rear Brake pedal bolt and nut
Available for:
All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes. 2016-2022 (replaces OEM Part # 0032100406S & 0032100356S)
All HUSQVARNA TC 125/250 / FC 250/450 2014-2022
And 2023 FC250/450
MOTO STUFF Athlete ID Logo Sheet
MS-ALS
Regular price $12.00 Save $-12.00Titanium Fork Guard Bolts
TIFGBKTM
Regular price $44.00 Save $-44.00Set of 6 Ti Fork Guard Bolts for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (set of 6 replaces OEM part 59001092050)
Fits HUSQVARNA TC 125/250 / FC 250/450 2014-2020
Titanium Radiator Flange Bolt Set
TIRFBKTM
Regular price $28.00 Save $-28.00Titanium Radiator Flange bolt Set for All 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (set of 4 replaces OEM 0024060123)
Fits HUSQVARNA TC 125/250 / FC 250/450 2016-2020
Titanium Front End Fastener Kit KTM-HUSQVARNA
TIFE12KTM16
Regular price $138.00 Save $-138.00Titanium Front End Fastener Kit
Front End Kits include: 8-Triple Clamp bolts, 4-handlebar clamp bolts, 4-fork lug pinch bolts and 2-brake caliper mounting bolts.
(Please note if you have a Factory Edition or Rockstar Edition or aftermarket clamps, please measure a bolt and let us know so we can exchange them for the correct size)
Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.
Install to the OEM torque specifications
Titanium Engine Fastener Kits KTM-HUSQVARNA
TIEN45KTM23
Regular price $268.00 Save $-268.00Titanium Engine Fastener / Bolt Kits And Front End Kits
Engine Kits include: Right and left engine case bolts, ignition cover bolts, clutch cover bolts, water pump cover, starter, chain guard, etc. Each component set of bolts is packaged in a ziplock with qty, length and location information.
Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.
Install to the OEM torque specifications
DANGO Designs Gripper Mount for GoPro
DD-GM-OR/BK
Regular price $49.95 Save $-49.95With the Gripper Mount, there’s no need to buy a different camera clamp for each helmet or vehicle or use bulky mounting hardware and sticky mounts that leave residue on your equipment. The Gripper Mount is compatible with all GoPro models and serves many purposes throughout your adventures. Use it as a quick-attach fixed camera mount, a handheld stabilizer, or a mini tripod. You can easily unmount and move the Gripper Mount as many times as it takes to find the best perspective. Then simply use the quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!
Dango Designs Gripper Mount Features:
Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO
Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Hardware Included in add on accessory adapter kit*
Titanium Seat Bolt - KTM SX125-450
TISB109
Regular price $19.00 Save $-19.00Long Titanium Seat Bolt for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes.
2016-2022 Replaces OEM part #79107040010
Titanium Front Axle and Steering Stem Cap Set
TIFATCKTM
Regular price $48.00 Save $-48.00Titanium Front Axle and Steering Stem Cap set fits all All 2008-2020 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (Set of 2 Replaces OEM 70009082000)
Fits HUSQVARNA TC 125/250 / FC 250/450 2014-2020
Titanium Oil Filler Plug
TIOFPKTM
Regular price $26.00 Save $-26.00Oil fill plug for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes ( QTY 1 replaces OEM Part 794300020033)
Fits
Does not fit Factory or Rockstar Editions or HINSON Clutch Covers
Titanium Valve Cover Bolt Set - KTM & HUSQVARNA
TIVCB25KTM
Regular price $32.00 Save $-32.00Titanium Valve Cover Bolt Set - KTM & HUSQVARNA
Choose your bike year/model below:
Option #1:
Option #2:
Option #3:
Option #4:
Chain adjuster bolts nuts
TICTBKTM
Regular price $48.00 Save $-48.00Pair of chain adjuster bolts/nuts for
Fits:
Pro Pegs Titanium Footpegs HUSQVARNA/GASGAS Mud Enduro
PPEN089h
Regular price $268.00 Save $-268.00The open pattern of the Enduro/Mud Version virtually eliminates clogging/packing of the peg if you are a peg dragger or ride in extremely muddy conditions frequently where this a common problem. Plus they look cooler and are lighter than the full traditional versions!
Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!
The Choice of Champions including Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more!
Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!
Fits:
M6 X 1.0 Titanium Flange Nut
Tim6nut
Regular price $3.95 Save $-3.95M6 X 1.0 Titanium Flange Nut