Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• KTM All Models: 125-525 2004-2015 (and 2016 250 2-stroke)
  
• KTM All Models: 125-525 2016-2022
• KTM Enduros: 50 2004-2020, 65 2004-2018, 85 2004-2017
• KTM 2018-20 SX 85 (except 2016 250 2-stroke)
  

• M6 X 1.0  bolts have 8mm heads (standard, not fine thread)
• M8 X 1.25 bolts have 10mm head (standard, not fine thread)

Torque to the OEM fastener spec for the bolt being replaced.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Pro Pegs Titanium Footpegs YAMAHA

The Choice of Champions including Brett Metcalfe, Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

PPMX004 fits:

• YAMAHA YZF 250 1999 - 2023 
• YAMAHA YZF 450 2002 - 2022
• YAMAHA YZ 65-85-125-250 1999 - 2024

PPMX042 fits:

Pro Pegs Titanium Rear Brake Lever Tip

Get a Grip!

Upgrade your slippery stamped steel stock tip with this super-grippy full titanium tip and eliminate the risk of brake lost at the most inopportune times!

• 2016-2023 KTM 125,150, 250 SX
• 2016-2023 KTM 250/350/450 SX-F/XCF
• 2016-2023 Husqvarna TC 125, TC250, FC 250/350/450

Pro Pegs Titanium Footpegs HONDA

• HONDA CR 125-250 2002-2007
• HONDA CRF 250-450 2003-2025

The Choice of Champions including Brett Metcalfe, Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• HONDA CR 125-250 2002-2007
• HONDA CRF 250-450 2003-2025

Pro Pegs Titanium Footpegs KAWASAKI

The Choice of Champions including Brett Metcalfe, Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more!

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• KAWASAKI KX 250 2005-2008
• KAWASAKI KXF 250-450 2007-2025

• M6 X 1.0  bolts have 8mm heads (standard, not fine thread)
• M8 X 1.25 bolts have 10mm head (standard, not fine thread)

Torque to the OEM fastener spec for the bolt being replaced.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

The Choice of Champions including Brett Metcalfe, Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• HUSQVARNA 2016 -2023 All
• HUSQVARNA 2014-2015 All

Titanium Front sprocket Bolts for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes. 2016-2020 (Replaces OEM part #59033034044)

Fits

• HUSQVARNA TC 125, 250 & FC 250/450 2014-2020
• GASGAS MC125-250 2019 > & MC250-450F 2019 >

CLOSEOUT SPECIAL!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• KTM All 125-525 2016-2022 and 2018-19 SX 85 (except 2016 250 2 stroke)
• KTM All Models 125-525 2004-'15 (and 2016 250 2 stroke)
• KTM Enduros, 50 2004-2020, 65 2004-'18, 85 2004-'17

Titanium Motor Mount Bolt Set - KTM, GASGAS & HUSQVARNA

Kit includes:

• 1-Titanium upper front Motor Mount Bolt
• 1-Titanium lower Motor Mount Bolt

Choose between the following two options:

• KTM 125/250 2016-2024
  
• KTM 250/350 2013-2024 
• GASGAS MC250F 2021-2024
• HUSQVARNA TC 125/250 2014-2024  
  
• HUSQVARNA FC 250/350 2014-2024
  

Option #2 TIEB45KTM Fits: (Pair Replaces OEM part # 59003013000)

• KTM 450 2007-2024
• GASGAS MC450F 2024
• HUSQVARNA FC 450 2014-2024
• HUSQVARNA TC 125-250 2024 

Set of 4 Ti  Subframe Bolts for 2016-2022 125 SX 250SX and 250SXF, 350 SXF, and 450 SXF  (Set of 4 replaces OEM part 0019080206S & 79003003000)

Does not fit HUSQVARNA

Titanium Rear Brake pedal bolt and nut 

Available for:

All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes. 2016-2022 (replaces OEM Part # 0032100406S & 0032100356S)

 All HUSQVARNA TC 125/250 / FC 250/450 2014-2022

And 2023 FC250/450

Titanium Screw Plastic 

Body fastener kit

6 bolts to fit the fork guard brake line clamp bracket, rear mud flap and upper front shroud to tank locations. 

For All KTM 125, 250, 300 2 stroke and all 250, 350, 450, and 525 four strokes. 2016-2020

Fits HUSQVARNA TC 125, 250 & FC 250/450 2014-2020

Set of 6 Ti Fork Guard Bolts for All  KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (set of 6 replaces OEM part 59001092050)

Fits HUSQVARNA TC 125/250 / FC 250/450 2014-2020

Pro Pegs Titanium Footpegs YAMAHA MUD/ENDURO

The open pattern of the Enduro/Mud Version virtually eliminates clogging/packing of the peg if you are a peg dragger or ride in extremely muddy conditions frequently where this a common problem. Plus they look cooler and are lighter than the full traditional versions!   

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

The Choice of Champions including Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle, and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• YAMAHA YZF 250 & 450 2002 - 2025
• YAMAHA YZ 65-85-125-250 1999 - 2025

Titanium Radiator Flange bolt Set for All 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (set of 4 replaces OEM 0024060123)

Fits HUSQVARNA TC 125/250 / FC 250/450 2016-2020 

Ultra trick Front brake pins for your racer or build!

Titanium Front End Fastener Kit

 Front End Kits include: 8-Triple Clamp bolts, 4-handlebar clamp bolts, 4-fork lug pinch bolts and 2-brake caliper mounting bolts.

(Please note if you have a Factory Edition or Rockstar Edition or aftermarket clamps, please measure a bolt and let us know so we can exchange them for the correct size)

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

CLOSEOUT SPECIALS

SAVE up to 50% on SELECT Kits!

Titanium Engine Fastener / Bolt Kits And Front End Kits

Engine Kits include: Right and left engine case bolts, ignition cover bolts, clutch cover bolts, water pump cover, starter, chain guard, etc. Each component set of bolts is packaged in a ziplock with qty, length and location information.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

Long Titanium Seat Bolt for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes.

2016-2022 Replaces OEM part #79107040010

Pro Pegs Titanium Footpegs HONDA MUD/ENDURO

The open pattern of the Enduro/Mud Version virtually eliminates clogging/packing of the peg if you are a peg dragger or ride in extremely muddy conditions frequently where this a common problem. Plus they look cooler and are lighter than the full traditional versions!   

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

The Choice of Champions including Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip! (Mud versions weigh even less!)

Fits: HONDA

• CR125-250 '02-'07
• HONDA CRF 250R & 450R 2002-2025

Titanium Front Axle and Steering Stem Cap set fits all All 2008-2020 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes (Set of 2 Replaces OEM 70009082000)

Fits HUSQVARNA TC 125/250 / FC 250/450 2014-2020

Oil fill plug for All KTM 125, 250, 300 2 stroke and all 250, 350, 450 and 525 four strokes ( QTY 1 replaces OEM Part 794300020033)

Fits

• HUSQVARNA TC 125/250 / FC 250/450 2015-2020
• KTM SX/SXF/EXC 125-450 All years

Does not fit Factory or Rockstar Editions or HINSON Clutch Covers

Titanium Valve Cover Bolt Set - KTM & HUSQVARNA

Choose your bike year/model below:

Option #1: 

• KTM SXF 250/350 (Set of 3 bolts replaces OEM 77336054150)
  
• HUSQVARNA FC 250/350 2014-2022
  

Option #2: 

• KTM 450 2013-2018 (set of 4 replaces OEM part#78036054100)
• HUSQVARNA FC 450 2014-2018 

Option #3: 

• KTM 450 2019-2022 (set of 3 bolts replaces OEM part # 79136054000)
• HUSQVARNA FC 450 2019-2022

Option #4: 

• 2023 KTM Factory Edition 450 

Pair of chain adjuster bolts/nuts for

Fits:

• All KTM 125/250/300 2-Strokes
• All KTM 250/350/450/525 4-strokes (Set of 2 replaces OEM Part 50304040100)
• All HUSQVARNA TC 125/250
• HUSQVARNA FC 250/450 2014-2020

The open pattern of the Enduro/Mud Version virtually eliminates clogging/packing of the peg if you are a peg dragger or ride in extremely muddy conditions frequently where this a common problem. Plus they look cooler and are lighter than the full traditional versions!   

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

The Choice of Champions including Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• HUSQVARNA 2016 -2023 All
• HUSQVARNA 2014-2015 All

Titanium Brake Pedal Bolt Honda

Fits Honda CRF250/450's 2005+

REPLACES OEM 46513-KRN-730

Front End Kits include 18 bolts: 

• 8-Triple Clamp bolts (Please note if you have aftermarket clamps, please measure a bolt and let us know so we can exchange them for the correct size)
• 4-handlebar clamp bolts
• 4-fork lug pinch bolts
• 2-brake caliper mounting bolts

Fits 2017-2023 450R and 2018-2023 250R 

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

Pro Pegs Titanium peg pivot pins

Aerospace Grade Titanium
– CNC Machined
– Heat Treated

Includes:
(2) Titanium Foot Peg Pins
(2) Titanium Washers

(2) Steel Cotter Pins 

Fits:

• 2016-2023 KTM 125,150, 250 SX
• 2016-2023 KTM 250/350/450 SX-F/XCF
• 2016-2023 Husqvarna TC 125, TC250, FC 250/350/450

M6 X 1.0 Titanium Flange Nut

Titanium Body work kit fits Honda 450's 2022+

8 bolt kit replaces radiator shrouds, Side plate and seat bolts. 

REPLACES OEM 90126-MKE-AF 0

OEM 90126-MEN-A70 / 90101-KRN-730

Engine Kits include: Right and left engine case bolts, ignition cover bolts, clutch cover bolts, water pump cover, starter, chain guard, etc. Each component set of bolts is packaged in a ziplock with qty, length and location information.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

Titanium Rear master cylinder mount bolts Honda CRF250/450 2005+

REPLACES OEM 90114-MAC-780

Titanium Front Brake Line Bolts Honda CRF250/450 2004-2022

 Includes Brake line clamp (2) and number plate guide loop (1) 

REPLACES OEM 90104-KRN-90 / 90113-KZ3-000

Titanium Engine Hanger Support Bolts CRF450 2021+

REPLACES OEM 90123-MEN-730 / 90102-MEN-A30

Titanium Sub Frame Bolt Kit Honda CRF450

Fits Honda CRF450's 2012+

REPLACES OEM 90122-MKE-AF 0

Titanium Fork Guard Bolt Kit Honda CRF

Fits Honda CRF 250's and 450s 1999+

REPLACES OEM 90113-MAC-780

Titanium skid plate / Engine Guard Kit Fits Honda 450's 2021+

Qty 2

REPLACES OEM 90126- MKE-A00

Titanium Chain Tension Bolt Kit Honda

Fits Honda CRF250/450's 2004+

REPLACES OEM 90105-MEN-000/90309-357-000

M10 X 1.5 Titanium Flange Nut

M10 X 1.25 Titanium Flange Nut

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• GasGas 250 & 450 2022
  

CLOSEOUT SPECIAL!

50% off!

Engine Kits include: Right and left engine case bolts, ignition cover bolts, clutch cover bolts, water pump cover, starter, chain guard, etc. Each component set of bolts is packaged in a ziplock with qty, length and location information.

Titanium Grade 5 (Ti 6Al-4V) Known as the “workhorse” of titanium alloys, Ti 6Al-4V, or Grade 5 titanium, is 2x stronger than titanium grade 2. This alloy offers high strength and lightweight (half the weight of the stock steel fasteners), high corrosion resistance. Ti 6AI-4V finds many uses in the aerospace and motorsports.

Install to the OEM torque specifications

The open pattern of the Enduro/Mud Version virtually eliminates clogging/packing of the peg if you are a peg dragger or ride in extremely muddy conditions frequently where this a common problem. Plus they look cooler and are lighter than the full traditional versions!   

Manufactured to the highest standards from aerospace grade titanium, using the latest manufacturing techniques to produce the strongest welds, eliminating stress and corrosion. Pro Pegs Titanium sets the standards with a bigger platform and greater surface area providing the rider with maximum GRIP!

The Choice of Champions including Justin Brayton, Malcolm Stewart, Blake Baggett, Justin Bogle and many more! 

• Tig Welded Aerospace Ti-6AL-4V Titanium
• 60 mm (2.4”) Wide Design
• Lightweight ( 350 gr/Set )
• 30 Teeth for ultimate grip
• Precision Fabrication by Hand
• Reduces boot wear as your foot is no longer grinding away on the peg!

Pro Pegs Ti pegs weigh only 175 grams each. (5.9 oz). About half the weight of the stock steel pegs with almost twice as much support and grip!

Fits:

• HUSQVARNA 2014-2015 All