Calipers & Mounts

Titanium Nitride coated Titanium Piston set with castellated contact surface to promote airflow into the piston cavity. Titanium has a much higher heat insulation factor further reducing heat transfer to the fluid. 

Kit includes one 27mm & one 30mm piston for use with the MOTO STUFF V2 Billet Caliper or the front differential bore caliper

FITS:

• 2019-2022 HONDA CRF 250R / 450R

Titanium Nitride coated Titanium Piston for HONDA CRF 250/450 rear caliper. Titanium has a much higher heat insulation factor further reducing heat transfer to the fluid. 

22mm X 32mm 

Original equipment HONDA 2019 11mm Bore Master Cylinder Upgrade for use on 2007 and newer Yamaha YZ & YZF models when running MOTO STUFF Works Edition Caliper. Works with the stock Yamaa line. 

HONDA uses a unique ball and socket internal linkage design that provides a silky smooth feel compared to the inconsistent ratchety feel that other designs provide after a few hours of use.

Also fits all 1996 and Newer HONDA CR & CRF 125/250/450R models.

Honda does not offer this as a complete assembly, so we buy the necessary components and assemble them so they are ready to install.

This is also a nice upgrade on 2006 and newer SUZUKI, KAWASAKI and YAMAHA models with the stock caliper if you want to improve the feel and power of the front brake. Works with the stock lines on all Japanese models. 

MOTO STUFF Caliper Brackets are precision machined from T6061 aluminum billet. After machining they are media tumbled for a smooth finish and then hard anodized for superior strength and performance. Our brackets are up to 50% lighter and 70% stronger than other brackets on the market. This is achieved through FEA model analysis and detailed machining processes.

Please Note! A bracket is included with all MOTO STUFF Brake kits, so these are for use as replacements if you somehow damage one or have a compatible 260mm, 270mm or 280mm rotor from another manufacturer.

Beware that you can not use the 2004-2014 bracket on the 2015 - 2021 models as it will position the caliper 5mm too far out and could lead to a situation where you have no brakes!

NOTE! To run 2004-2014 forks on 2015-2021 bikes using the stock 2015-2020 260mm rotor, use the 260mm adapter bracket.

If you have any questions about compatibility or fitment, please give us a call or send us an e-mail to info@MOTOSTUFF.COM

Fits KAWASAKI KXF 250 and KXF 450 2006-2022

MOTO STUFF Caliper Brackets are precision machined from T6061 aluminum billet. After machining they are media tumbled for a smooth finish and then hard anodized for superior strength and performance. Our brackets are up to 50% lighter and 70% stronger than other brackets on the market. This is achieved through FEA model analysis and detailed machining processes.

Please Note! A bracket is included with all MOTO STUFF Brake kits, so these are for use as replacements if you somehow damage one or have a compatible 280mm rotor from another manufacturer.

If you have any questions about compatibility or fitment, please give us a call or send us an e-mail to info@MOTOSTUFF.COM

Fits KAWASAKI KXF 250 and KXF 450 2006-2022

Fits SUZUKI RMZ 250 2007-2022 and RMZ 450 2006-2022

MOTO STUFF Caliper Brackets are precision machined from T6061 aluminum billet. After machining they are media tumbled for a smooth finish and then hard anodized for superior strength and performance. Our brackets are up to 50% lighter and 70% stronger than other brackets on the market. This is achieved through FEA model analysis and detailed machining processes.

Please Note! A bracket is included with all MOTO STUFF Brake kits, so these are for use as replacements if you somehow damage one or have a compatible 280mm rotor from another manufacturer.

If you have any questions about compatibility or fitment, please give us a call or send us an e-mail to info@MOTOSTUFF.COM

MOTO STUFF Caliper Brackets are precision machined from T6061 aluminum billet. After machining they are media tumbled for a smooth finish and then hard anodized for superior strength and performance. Our brackets are up to 50% lighter and 70% stronger than other brackets on the market. This is achieved through FEA model analysis and detailed machining processes.

Please Note! A bracket is included with all MOTO STUFF Brake kits, so these are for use as replacements if you somehow damage one or have a compatible 280mm rotor from another manufacturer.

Fits: 1993-2022 125-525 all models

If you have any questions about compatibility or fitment, please give us a call or send us an e-mail to info@MOTOSTUFF.COM

Pair of Billet Aluminum Banjo Bolts with Safety Wire holes (a new set of copper seals included with each kit)

M10 X 1.25 fits all Japanese MX bikes. (does not fit KTM/HUSKY) 20mm long from the base of the bolt flange to the tip of the threads Sold by the pair (1 pair is 2 bolts), so please be sure to select the quantity you want in the shopping cart before checking out! Our new design fits all JAPANESE MX bikes 2004-2020 and features a small 12mm head so there are no clearance issues at the rear master cylinder! And they are also now drilled for safety wire. At only $18 each, these are half the price of similar high-end banjo bolts on the market!

Torque to 12-14 lbs/ft!

Available for 2014-2022 125-525 all models - Titanium Gray Color

MOTO STUFF Caliper Brackets are precision machined from T6061 aluminum billet. After machining they are media tumbled for a smooth finish and then hard anodized for superior strength and performance. Our brackets are up to 50% lighter and 70% stronger than other brackets on the market. This is achieved through FEA model analysis and detailed machining processes.

Please Note! A bracket is included with all MOTO STUFF Brake kits, so these are for use as replacements if you somehow damage one or have a compatible 280mm rotor from another manufacturer.

If you have any questions about compatibility or fitment, please give us a call or send us an e-mail to info@MOTOSTUFF.COM

Pair of Billet Aluminum Banjo Bolts with Safety Wire holes (a new set of copper seals included with each kit)

M10 X 1.0 fits all KTM, HUSKY and Gas Gas bikes with Brembo brakes. 19 mm long from the base of the bolt flange to the tip of the threads Sold by the pair (1 pair is 2 bolts), so please be sure to select the quantity you want in the shopping cart before checking out! Our new design fits all KTM, HUSKY and Gas Gas bikes with Brembo brakes and features a small 12mm head so there are no clearance issues at the rear master cylinder! And they are also now drilled for safety wire. At only $18 each, these are half the price of similar high-end banjo bolts on the market!

Torque to 12-14 lbs/ft!