Brake Hardware

Pair of Billet Aluminum Banjo Bolts with Safety Wire holes (a new set of copper seals included with each kit)

M10 X 1.25 fits all Japanese MX bikes. (does not fit KTM/HUSKY) 20mm long from the base of the bolt flange to the tip of the threads Sold by the pair (1 pair is 2 bolts), so please be sure to select the quantity you want in the shopping cart before checking out! Our new design fits all JAPANESE MX bikes 2004-2020 and features a small 12mm head so there are no clearance issues at the rear master cylinder! And they are also now drilled for safety wire. At only $18 each, these are half the price of similar high-end banjo bolts on the market!

Torque to 12-14 lbs/ft!

Ultra trick Front brake pins for your racer or build!

BOLT Hub-Savers FUJI Lock Sprocket Bolt Kit - Silver

This kit includes six class 10.9 zinc plated steel sprocket bolts with factory style class 10.9 Fuji metal-locking nuts and washers. Each sprocket bolt has medium strength thread lock patches pre-applied, which liquefies and anaerobically seals when the bolt is tightened for a double-lock. This kit also includes an 8mm socket tool insert for socket wrenches.

Fits all Japanese and most European dirt bikes.

Our hardware meets or exceeds OEM specs. Proudly designed and assembled in the USA with components from the USA & Taiwan.

Important installation information:

Hub-Savers are the strongest, most complete sprocket fasteners available and have been developed and tested at the professional level in both motocross and off-road applications.

Sprocket bolts are a critical fastener and must be installed properly to ensure your safety and to avoid damaging your machine. To ensure long and reliable use of these quality fasteners:

• First clean and inspect your hub. If the hub is damaged or if the mounting holes are oval, the hub must
• Use the included Allen insert in an 8mm socket wrench to install the sprocket bolts.
• Refer to your owner’s manual for the proper torque (typically 25 ft-lbs), take the torque reading on the nut side. Never over-tighten sprocket bolts!

If your sprocket bolts become loose, they must be replaced! Sprocket bolts become loose only under extreme stress, an indication that either they were installed improperly or there is a problem with the driveline. Check the driveline for bent chain guides, bad wheel alignment, damaged mounting holes on the hub, etc. Properly tightened sprocket bolts on properly functioning drive lines will remain tight indefinitely.

The rear rotor bolts in this kit feature medium strength threadlock patches preapplied to threads. Front rotor bolts included.
Kit Includes:

• (6) M6x16mm rear rotor bolts


• (6) M6x12mm front rotor bolts

Fits: '99-'12 YZ125/250, '01-'13 YZ250F/400F/426F/450F, '01-'13 WR250/450
Our hardware meets or exceeds OEM specs. Proudly designed and assembled in the USA with components from Taiwan.

Our KTM Rotor Bolt Kit features medium strength thread lock patches pre-applied to rotor bolts.

Kit Includes:

• (12) M6x13mm rotor bolts

Our hardware meets or exceeds OEM specs. Proudly designed and assembled in the USA with components from Taiwan.

Fits: 50cc-550cc models years 2001- Current

These rotor bolts feature medium-strength Threadlock pre-applied to both front and rear rotor bolts.

Fits:  

• Kawasaki KX65 2000 - 2020
  
• Kawasaki KX85 2001 - 2020
  
• Kawasaki 125/250 2003 - 2007
• Kawasaki KX250F/450F 2004 - 2020
• Kawasaki KLR 650 1987 - 2018

Our Suzuki Rotor Bolt kit fastens both front and rear wheel. These rotor bolts feature medium strength thread lock patches.
Kit includes:

• (12) M6x12mm rotor bolts

• (6) M6x13mm rotor bolts

Fits:

'00-'12 RM65 RM 80/85 2001-2020 , RM125/250  2001-2008

 '04-'20 RMZ250, '05-'20 RMZ450 

Our hardware meets or exceeds OEM specs. Proudly designed and assembled in the USA with components from Taiwan.

Pair of Billet Aluminum Banjo Bolts with Safety Wire holes (a new set of copper seals included with each kit)

M10 X 1.0 fits all KTM, HUSKY and Gas Gas bikes with Brembo brakes. 19 mm long from the base of the bolt flange to the tip of the threads Sold by the pair (1 pair is 2 bolts), so please be sure to select the quantity you want in the shopping cart before checking out! Our new design fits all KTM, HUSKY and Gas Gas bikes with Brembo brakes and features a small 12mm head so there are no clearance issues at the rear master cylinder! And they are also now drilled for safety wire. At only $18 each, these are half the price of similar high-end banjo bolts on the market!

Torque to 12-14 lbs/ft!