HONDA finally began offering a hydraulic clutch beginning on the 2021 HONDA CRF 450R. And for some unknown reason, the line routing is right in your face! It just feels wrong! Plus it's a cheap rubber line that allows some squishiness in the lever feel.  

Get a nice consistent solid feel with our stainless steel braided line upgrade that also reroutes the line behind the number plate, just like on Ken Roczens bike!  

 

Please note, the line shown in the images here has transparent red end fittings, but all of our production lines have polished stainless as shown in the line photo below. 

12 Bolt Billet Aluminum Body Fastener Kit

50% lighter than Titanium and half the cost, these trick fastener kits give your bike that factory works look!  

12 Bolt Kit Contents:

• 2- Seat bolts (5mm Allen max torque 6-Nm or 50 inch /lbs)
• 4- Side plate Bolts  (5mm Allen max torque 5-Nm or 40 inch /lbs)
• 6- Radiator Shroud Bolts (5mm Allen max torque 5-Nm or 40 inch /lbs)

20 bolt kits are also available that add 6 fork guard bolts and 2 fork guard brake line clamp bolts to the above kit.  

** MOTO STUFF recommends that you use a T handle Allen wrench to snugly tighten aluminum fasteners. If you must use a torque wrench, make sure it is a high quality 1/4" drive. DO NOT USE a 3/8" or 1/2" torque wrench, you will break stuff!

Available in Natural Silver or anodized RED and now The Exclusive GEICO Team Ti Gray! The cool thing about the Ti gray is that it looks great with just about any graphics or plastics color. 

Get that trick factory look with the MOTO STUFF T-12 Billet aluminum fastener kits. Our T7075 kits are 1/3 the weight of the stock steel bolts and half the weight of Titanium bolts!

New lightweight low profile design eliminates the problem of catching the radiator shroud fasteners on your pants and boots.

Manufactured from T7075 high tensile aluminum**. All bolts are made to exact original specs including locating-spacing shoulders so they properly locate the plastic without crushing it. 

** MOTO STUFF recommends that you use a T handle Allen wrench to snugly tighten aluminum fasteners. If you must use a torque wrench, make sure it is a high quality 1/4" drive. DO NOT USE a 3/8" or 1/2" torque wrench, you will break stuff!

Fits:

• 2013-2020 CRF450R
• 2014-2020 CRF250R

Choose your bike model, year and color!

 

 

20 Bolt Billet Aluminum Body Fastener Kit

50% lighter than Titanium and half the cost, these trick fastener kits give your bike that factory works look!  

20 Bolt Kit Contents:

• 2- Seat bolts (5mm Allen max torque 6-Nm or 50 inch /lbs)
• 4- Side plate Bolts  (5mm Allen max torque 5-Nm or 40 inch /lbs)
• 6- Radiator Shroud Bolts (5mm Allen max torque 5-Nm or 40 inch /lbs)
• 6- fork guard bolts
• 2- fork guard brake line clamp bolts 

** MOTO STUFF recommends that you use a T handle Allen wrench to snugly tighten aluminum fasteners. If you must use a torque wrench, make sure it is a high quality 1/4" drive. DO NOT USE a 3/8" or 1/2" torque wrench, you will break stuff!

Available in Natural Silver or anodized RED and now The Exclusive GEICO Team Ti Gray!. The cool thing about the Ti gray is that it looks great with just about any graphics or plastics color. 

Get that trick factory look with the MOTO STUFF T-20 Billet aluminum fastener kits. Our T7075 kits are 1/3 the weight of the stock steel bolts and half the weight of Titanium bolts!

New lightweight low profile design eliminates the problem of catching the radiator shroud fasteners on your pants and boots.

Manufactured from T7075 high tensile aluminum**. All bolts are made to exact original specs including locating-spacing shoulders so they properly locate the plastic without crushing it. 

** MOTO STUFF recommends that you use a T handle Allen wrench to snugly tighten aluminum fasteners. If you must use a torque wrench, make sure it is a high quality 1/4" drive. DO NOT USE a 3/8" or 1/2" torque wrench, you will break stuff!

 

Fits all 2013-2020 CRF450R & 2014-2020 CRF250R's 

Choose your bike model, year and color!

SOLD individually. Please adjust order quantity accordingly!

Lightweight aluminum fork guard, disc cover and fork guard brake line clamp bolts. Anodized in brilliant Red, GEICO GREY or natural Silver! Wanna look like Barcia, Trey or Ryan? Now ya can! Yeah, they are expensive, but we've got the only ones that have the integrated shoulder that positively locate the guards and prevent the plastic from being damaged from over-tightening. They are also the only ones with the correct 5mm allen size. IRP Billet Fasteners by. MOTO STUFF is the exclusive source for IRP Quality Billet Products.

Each Fork Guard uses 3 bolts. These bolts are sold individually. Check your disc guard if equipped to see how many it uses prior to ordering.

Please adjust your order quantity as needed! qty 1=1 bolt!

Fits:

• All 2002-2020 CRF 250R & 450R models
• 2001-2007 CR 125-250-500 models

 

 

CLOSEOUT!

Pair of Billet Aluminum Banjo Bolts with Safety Wire holes (a new set of copper seals included with each kit)

M10 X 1.25 fits all Japanese MX bikes. (does not fit KTM/HUSKY) 20mm long from the base of the bolt flange to the tip of the threads Sold by the pair (1 pair is 2 bolts), so please be sure to select the quantity you want in the shopping cart before checking out! Our new design fits all JAPANESE MX bikes 2004-2020 and features a small 12mm head so there are no clearance issues at the rear master cylinder! And they are also now drilled for safety wire. At only $18 each, these are half the price of similar high-end banjo bolts on the market!

Torque to 12-14 lbs/ft!

The factory Team bikes look so trick because they don't have a bunch of logos plastered all over them and that's why the MOTO STUFF engine cap sets are made without any logos. Just a nice clean Anodized Billet Aluminum piece that says "Let's Get Down to Business!

Comes with new HD Viton O-rings installed!

• 2002-2015 450 Kit includes 2 plugs, 1 small for the cam timing port and 1 large for the crankshaft timing port

• 20010-2015 250 Kit includes 2 plugs, 1 small for the cam timing port and 1 large for the crankshaft timing port

• 2004-2009 250 Kit includes 3 plugs, 2 small for the cam and flywheel timing ports and one large for the crankshaft timing port

CYCRA Disc Guard options and applications Please select the appropriate kit from the options below:

2013 & 2021 HONDA CRF 250R & 450R The CYCRA oversize disc guard requires a special standoff adapter to allow the use of the Cycra Disc Guard for 240-280mm diameter brake rotors. This kit includes the Cycra guard in Works Clear (same color as the stock disc guard) or Factory Black. Also included is the required standoff spacer for the lower rear mount and all mounting fasteners. Easily installed in about 5 minutes with common hand tools. Protect your brake rotor and caliper form debris for maximum performance and longevity. To order, select your color choice from the options above! 2 steel fork guard/disc guard bolts are included. Red, blue or silver billet fasteners can be ordered separately in our accessories category.

2009-2012 HONDA CRF 250R & 450R On these models HONDA introduced a disc guard that is integrated with the axle spacer. This design prevents the use of the popular CYCRA disc guard when running oversized brakes. We worked with the GEICO HONDA Race team to develop this easy to install adapter kit (this is a complete kit including CYCRA disc guard) that allows you to run the CYCRA oversize disc guard compatible with 240mm to 280mm rotors and protect your brakes from the elements. Easily installed in about 5 minutes, our kit provides a strong yet lightweight billet aluminum factory style mount. You will have to press or cut the axle spacer out of your original disc guard or you can order one of our popular billet vented axle spacers or the ZETA Red axle spacer set available in the brake and wheel sections of our website too. To order, select your color choice from the options above! 2 steel fork guard/disc guard bolts are included. Red, blue or silver billet fasteners can be ordered separately in our accessories category. 

2002- 2008 HONDA CRF 250R & 450R The CYCRA Oversized Disc guard is a direct bolt-on replacement for the stock disc guard and can be used with oversized rotors from 240mm up to 280mm in diameter. Available in Factory Black or Factory Works Clear (same color as the stock disc guard and fork guards).

CLOSEOUT!

Upgrade the appearance, performance, and reliability of your bike by switching out its stock rubber hoses with MOTO STUFF Silicone Radiator Hose Kit. The kit features premium-grade silicone throughout providing increased temperature and pressure performance. This is especially important if you are running a high compression piston or higher pressure radiator caps.

Features Include: Made of premium-grade silicone Operates at higher temperatures and pressures than stock rubber hoses Features a premium red or blue silicone pigment that will stay vibrant and will not fade over time like economy hose kits.

The kit features premium-grade silicone throughout providing increased temperature and pressure performance. Features Include: Made of premium-grade silicone Operates at higher temperatures and pressures than stock rubber hoses Features a premium red or blue silicone pigment that will stay vibrant and will not fade over time like economy hose kits.

Features Include: Made of premium-grade silicone Operates at higher temperatures and pressures than stock rubber hoses Features a premium red or blue silicone pigment that will stay vibrant and will not fade over time like economy hose kits.

Made of premium-grade silicone: Provides greater protection when operating at higher temperatures and pressures than stock rubber hoses Features a premium red or blue silicone pigment that will stay vibrant and will not fade over time like economy hose kits.

CLOSEOUT! 

Honda introduced a plastic radiator plug on the left radiator of the 2014 CRF 250R and the 2013-20140 CRF 450R to allow air to be purged from the cooling system when refilling. The plug can be damaged by rock impact or melt under extreme load conditions. Coolant loss or even minimal cooling system pressure loss can lead to rapid serious engine damage with costly repairs. HONDA does not sell the stock plug separate from the radiator!

Details:

• Alloy CNC machined red anodized includes heat-resistant o-ring
• M12 X 1.25 

Fits:

• 2014-2017 CRF 250R
• 2013 - 2016 CRF 450R

Kawasaki introduced a plastic radiator plug on the left radiator of the 2016 KX 450F  to allow air to be purged from the cooling system when refilling. The plug can be damaged by rock impact or melt under extreme load conditions. Coolant loss or even minimal cooling system pressure loss can lead to rapid serious engine damage with costly repairs.  

Details:

• Alloy CNC machined red anodized includes heat-resistant o-ring

• Fits: 2016-2018 KX 450F

Splitstream Fuel Filter Honda CRF

Each Splitstream fuel filter is made of fuel safe nylon mesh for long life and protection. Designed for a snug fit under the fuel cap, where it strains all fuel that enters the fuel tank. When you are riding it is under your fuel cap ready for the next fill up.

A couple of things we noticed while testing the Splitstream fuel filters over the past few months.

1. We were concerned that the filter might slow down the filling process, but we did not experience that with any of our fuel jugs. If you do begin to experience reduced fill speed, then it's probably time to pull the filter out and give it a good wash with hot water and dish soap in the kitchen sink. Be sure to rinse thoroughly!
2. On the first fill-up, it seems like the sock filter will prevent you from being able to see the fuel level as the tank is filling, but it is just like normal, you can see the fuel level in the sock as the tank fills. Below are links to recent posts on Thumpertalk.com that go into the severity of the problem in much more detail.

Here are some helpful links regarding the fuel system on modern injected bikes:

• http://www.thumpertalk.com/topic/751249-efi-owners-bike-bogging-the-fix-with-pics/
• http://www.thumpertalk.com/topic/713577-09-crf-450-fuel-problems/
• http://www.thumpertalk.com/topic/676526-09-fuel-pump/

With the introduction of fuel injection on several 2009 MX bikes, clean fuel has become critical. Many owners are experiencing loss of power and starting issues related to contaminated fuel. The contaminants gradually accumulate in the in-tank filter and over time reduce flow to the point that it begins to affect performance.

Initially, the complete fuel pump assembly had to be replaced at over $300 on some models. The quality control on pump gas is really poor nowadays and you will not believe what you'll find in the filter! Over a short period of time, unfiltered fuel allows debris that will eventually begin to cause starting problems and bogging due to clogging. In severe cases, the bike will not start/run at all and can cause the bike to bog or stall at the most inopportune of times.......

The fine micron mesh material used in the Splitstream fuel filter will even filter out water, however, you will need to pull the filter and shake it out after fueling, otherwise, the vibration of the running bike will allow the water to pass through the filter.

This filter fits the following Bikes:

• HONDA CRF 250R 2010-2017
• HONDA CRF 450R 2009-2016
• Does not fit 2017 -2018 450R or RX or 2018 CRF 250R

With the Gripper Mount, there’s no need to buy a different camera clamp for each helmet or vehicle or use bulky mounting hardware and sticky mounts that leave residue on your equipment. The Gripper Mount is compatible with all GoPro models and serves many purposes throughout your adventures. Use it as a quick-attach fixed camera mount, a handheld stabilizer, or a mini tripod. You can easily unmount and move the Gripper Mount as many times as it takes to find the best perspective. Then simply use the quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!

Dango Designs Gripper Mount Features:

• Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
• Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
• Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
• Flexible front web conforms to your object.
• Robust dual torsion spring provides strong clamping force.
•  2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
• Compatible with ¼ in 20 mounted digital action cameras (adapter version only see tab) (see adapter kit in 2nd tab) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session, and Hero 6 Black.
• Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included.

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is.  You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

 

Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation) 

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms.  Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

• Compatible with Dango Design Gripper Mount and other action camera mounts
  • All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
• Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
• The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included

Hardware Included in add on accessory adapter kit*

• 20 mm Universal Extension Arm with Screw
• 35 mm Universal Extension Arm with Screw
• 1/4”-20 Universal Camera Adapter
• * Gripper Mount and GoPro camera not included

 

 

Work Hard. Clean Up Right. American Made.

Eagle Grit's industrial-strength hand cleaner starts with their micro-scrubbing formulas, created from scratch through their very own recipes. Then mass-produced in their warehouse, each batch is sent over to their distribution center in drums where each bottle is hand-pumped, labeled and packed. Case by case, day by day, truck by truck, Eagle Grit's passion-filled product makes its way down the roads like veins to the heart of the land.

All Natural:

• Detergent based formula - no solvents or pumice.
• Drain friendly product and recyclable container!

The Grit:

• Removes virtually all substances, kills odor, moisturizes and repairs all without irritation.