WORKS EDITION Billet Caliper
MS-CAL-C-V2BRegular price $888.00 Save $-888.00
The MOTO STUFF WORKS EDITION Billet 1-Piece Caliper
20% lighter than the stock cast aluminum NISSIN calipers found on HONDA, KAWASAKI, SUZUKI, and YAMAHA MX bikes. Our new billet construction design is an exact replica of the WORKS NISSIN part found on top factory team bikes like Ken Roczens HONDA CRF 450R and Eli Tomacs KX450F, All GEICO bikes, etc. The only difference is that our design is compatible with stock caliper brackets and fork lug spacing!
The worlds only aftermarket differential bore caliper! (2 different piston sizes) for modern MX bikes. The differential bore design uses a 27mm piston on the leading edge and a larger 30mm piston on the trailing edge. This design eliminates the uneven pinching effect (uneven force distribution) that naturally occurs whenever you apply a clamping force to a rotating component. The balanced force dispersion provides lower operating temps, reduced brake fade, reduced wear and most importantly more controllable and consistent modulation and power. As the surface of the rotor heats up, the clamping force of the pistons has to be increased to avoid brake fade.
OPTIONAL UPGRADE: If you are severely abusive and fast enough to fade your brakes or you just love really trick stuff, we can build your caliper with our ultra trick Titanium Nitride coated Titanium castellated pistons. The thermal conductivity of Titanium is 10 times lower than Aluminum! The castellated crown (semi-circle cutouts milled into the piston crown) provides airflow to the backside of the piston further improving fade resistance. You can add select the Ti Piston option above.
Key Features and Benefits:
Fits all current MX bikes except KTM/HUSKY
PLEASE NOTE the two following important details:
The MOTO STUFF Billet 1-Piece Caliper is available for most modern (2004-2020) HONDA, KAWASAKI, SUZUKI and YAMAHA MX bikes (including 2 strokes) and it is a great compliment to the MOTO STUFF Blade Braking System! The MOTO STUFF "WORKS EDITION" caliper is ready to bolt on and equipped with premium components including stainless steel sliding pin, Billet Banjo bolt, billet Bleeder cap and AP Racing pads. A true works level caliper at an affordable price!
DOES not fit KTM or HUSKY!
1-Year Warranty Materials and Workmanship
Available for the following Models Application:
PLEASE NOTE: 2007-2022 Yamaha models will require that you upgrade the Master Cylinder. Available here- 11mm Master cylinder Upgrade
PLEASE NOTE the two following important details:
Titanium Piston Upgrade Front Caliper
27-30-TiRegular price $188.00 Save $-188.00
Titanium Nitride coated Titanium Piston set with castellated contact surface to promote airflow into the piston cavity. Titanium has a much higher heat insulation factor further reducing heat transfer to the fluid.
Kit includes one 27mm & one 30mm piston for use with the MOTO STUFF V2 Billet Caliper or the front differential bore caliper
HONDA CRF Front Master Cylinder Upgrade (Assembled)
MS-HMC-1Regular price $288.00 Save $-288.00
Original equipment HONDA 2019 11mm Bore Master Cylinder Upgrade for use on 2007 and newer Yamaha YZ & YZF models when running MOTO STUFF Works Edition Caliper. Works with the stock Yamaa line.
HONDA uses a unique ball and socket internal linkage design that provides a silky smooth feel compared to the inconsistent ratchety feel that other designs provide after a few hours of use.
Also fits all 1996 and Newer HONDA CR & CRF 125/250/450R models.
Honda does not offer this as a complete assembly, so we buy the necessary components and assemble them so they are ready to install.
This is also a nice upgrade on 2006 and newer SUZUKI, KAWASAKI and YAMAHA models with the stock caliper if you want to improve the feel and power of the front brake. Works with the stock lines on all Japanese models.
Caliper Brackets HONDA
MS-CB-280-H-4Regular price $128.00 Save $-128.00
MOTO STUFF Caliper Brackets are precision machined from T6061 aluminum billet. After machining they are media tumbled for a smooth finish and then hard anodized for superior strength and performance. Our brackets are up to 50% lighter and 70% stronger than other brackets on the market. This is achieved through FEA model analysis and detailed machining processes.
Please Note! A bracket is included with all MOTO STUFF Brake kits, so these are for use as replacements if you somehow damage one or have a compatible 260mm, 270mm or 280mm rotor from another manufacturer.
Beware that you can not use the 2004-2014 bracket on the 2015 - 2021 models as it will position the caliper 5mm too far out and could lead to a situation where you have no brakes!
NOTE! To run 2004-2014 forks on 2015-2021 bikes using the stock 2015-2020 260mm rotor, use the 260mm adapter bracket.
If you have any questions about compatibility or fitment, please give us a call or send us an e-mail to info@MOTOSTUFF.COM
Lightweight Billet Aluminum Banjo Bolts for NISSIN Calipers (pair)
MS-BB-BRegular price $36.00 Save $-36.00
Pair of Billet Aluminum Banjo Bolts with Safety Wire holes (a new set of copper seals included with each kit)
M10 X 1.25 fits all Japanese MX bikes. (does not fit KTM/HUSKY) 20mm long from the base of the bolt flange to the tip of the threads Sold by the pair (1 pair is 2 bolts), so please be sure to select the quantity you want in the shopping cart before checking out! Our new design fits all JAPANESE MX bikes 2004-2020 and features a small 12mm head so there are no clearance issues at the rear master cylinder! And they are also now drilled for safety wire. At only $18 each, these are half the price of similar high-end banjo bolts on the market!
Torque to 12-14 lbs/ft!